Krayuv

The RFQ Process, Step by Step

9 min read

How a request for quotation works in procurement: what an RFQ is, the eight steps from specification to award, the three RFQ workflows, and the mistakes that make quotes impossible to compare.

01

What an RFQ is and what the term means

A request for quotation (RFQ) is a document a buyer sends to selected suppliers asking for price and terms on a clearly defined requirement.

The key word is defined. An RFQ is used when you already know what you want to buy, down to the specification, quantity and delivery location, and the open question is who supplies it at the best commercial result. That is what separates it from an RFI, which gathers information, and an RFP, which asks suppliers to propose a solution. The RFQ vs RFP vs RFI guide covers that distinction in detail, and the RFQ glossary entry gives the short definition.

People often confuse an RFQ with a quotation. They are two halves of one exchange. The RFQ is the buyer's request. The quotation is the supplier's answer: line prices, delivery timeline, payment terms, warranty and any conditions. A purchase order (PO) comes later, and it is the buyer's commitment to buy, not part of the quoting exchange.

02

When to use an RFQ instead of an RFP, RFI or auction

Choose the sourcing event by how well you understand the requirement and how much the market can differ on price.

  • RFQ: the specification is fixed, several suppliers can meet it, and price plus delivery and payment terms decide the outcome.
  • RFP: you know the problem but not the solution, so suppliers need room to propose approaches and you will score them on more than price.
  • RFI: you are still learning who can supply and what is possible, and you are not ready to compare prices.
  • Reverse auction: the specification is fixed, the supplier pool is qualified, and live competition on price is acceptable. Many teams run an RFQ first to qualify suppliers and then an auction to settle price. See reverse auction vs RFQ for how the two fit together.

RFQs suit repeat goods, standard services, spare parts, packaging, raw materials and any category where the buyer can write the requirement down without ambiguity.

03

The RFQ process in eight steps

Every RFQ, whether it runs on email and spreadsheets or on software, follows the same sequence. The steps below are the whole process at a glance; the sections that follow explain each pair.

  1. Step 1: Define the need and specification

    Write down what you are buying, in what quantity, to what standard, and where and when it must arrive.

  2. Step 2: Shortlist suppliers

    Choose suppliers who can realistically meet the requirement, using past performance, qualification checks and market knowledge.

  3. Step 3: Issue the RFQ

    Send the same document, terms and deadline to every shortlisted supplier at the same time.

  4. Step 4: Handle clarifications

    Answer supplier questions in a way that every bidder can see, so no one holds an information advantage.

  5. Step 5: Receive sealed quotations

    Collect responses by the deadline and keep prices unseen until the deadline passes.

  6. Step 6: Normalize and compare

    Put quotes on a like-for-like basis and compare price, delivery, payment terms and technical fit side by side.

  7. Step 7: Negotiate or run an auction

    Use competition or negotiation on the shortlisted quotes where the buying policy allows it.

  8. Step 8: Award and issue the PO

    Select the winner or winners, record why, notify everyone, and convert the decision into a purchase order.

04

Steps 1 and 2: define the need and shortlist suppliers

Quote quality is decided before the RFQ goes out. A vague specification produces quotes for slightly different things, and a price comparison across different things is meaningless. Before writing anything, confirm the item description or standard, the quantity (including whether it is a one-time or recurring need), the delivery location and date, and any compliance or certification requirement. If the need originates from a purchase requisition, check that the requisition is approved first. The guide to writing an RFQ walks through each section in detail.

Shortlisting is a balance. Too few suppliers and you lose competitive pressure. Too many and the suppliers who would have won stop taking the exercise seriously, while your team drowns in comparison work. A common working range is three to six qualified suppliers for a standard requirement, widened for high-value or highly competitive categories. Base the list on evidence: past delivery, quality history, financial standing and certifications, not just who answers the phone fastest.

If you have a vendor management process, the shortlist should come from approved suppliers whose documents are current. Inviting an unvetted supplier and discovering a compliance gap after award is the expensive way to learn the same lesson.

05

Steps 3 and 4: issue the RFQ and handle clarifications

When you issue the RFQ, send an identical package to every supplier: the specification, quantity, delivery terms, payment expectations, quotation format, evaluation basis, terms and conditions, and a single hard deadline. State how long a quote must stay valid and how suppliers should submit. If you say nothing about the format, you will receive quotes in a dozen shapes.

Clarifications are where fairness is won or lost. Suppliers will ask questions, and some answers change the requirement. If you answer one supplier by phone, the others quote against a different brief. The rule is simple: any answer that clarifies or changes the requirement goes to all invited suppliers. If a clarification materially changes the scope, consider extending the deadline so suppliers can reprice.

06

Steps 5 and 6: receive sealed quotes, then normalize and compare

Sealed means the buyer does not see prices until the deadline has passed. This protects suppliers from being pressured by an early look and protects the buyer from any suggestion that a number was shared. In a manual process, sealing depends on discipline: a shared inbox that nobody opens early. In software, it can be enforced: in Krayuv, quotations are not visible to the buyer until the deadline passes and the RFQ is unlocked, and unlocking cannot be reversed.

Comparing quotes is the step that quietly eats the most time. Suppliers quote in different currencies, with different units, taxes included or excluded, freight inside or outside the price and different delivery timelines. Normalizing means converting everything to one basis before comparing. At minimum, line up these items for every supplier:

  • Unit price and total price for each line, in one currency.
  • Whether taxes, duties and freight are included.
  • Delivery timeline and any partial-delivery terms.
  • Payment terms and quote validity.
  • Warranty, certifications and attached documents.
  • Any conditions or exclusions the supplier added.

A side-by-side comparison that highlights the lowest price, filters to qualified suppliers only and exports to Excel saves the manual re-keying step. RFQ software exists mainly to do this part well. Lowest price is not automatically the best answer, but you cannot judge the trade-off until the quotes are comparable.

07

Steps 7 and 8: negotiate or auction, then award

Once quotes are comparable, you have three honest options. You can award on the quotes as submitted. You can negotiate with one or more shortlisted suppliers on price, delivery or terms. Or you can move the shortlisted, qualified suppliers into a reverse auction for a final round of live price competition. Which you choose depends on your buying policy, the value at stake and how close the quotes are.

Awarding means choosing a winner, or splitting the requirement across several suppliers, and then recording the reason. The reason matters more than people expect. Months later, an auditor or a finance lead may ask why the second-cheapest supplier won, and an award note that says delivery within the required window was decisive answers the question in one line. Notify the winners, close the RFQ so the other quotes are marked as not selected, and turn the decision into a purchase order. Telling unsuccessful suppliers promptly keeps them willing to quote next time.

08

Commercial-only, two-envelope and combined RFQ workflows

Not every RFQ should be run the same way. The structure depends on whether technical suitability is a concern separate from price.

Three common RFQ workflows and when each fits
WorkflowHow it runsBest for
Commercial onlySingle stage. Suppliers submit price and terms for a fixed specification.Standard goods and services where any compliant supplier will do.
Two envelopeTechnical evaluation first. Only suppliers who qualify technically are asked for, or have their commercial bids opened.Equipment, engineered items and services where unsuitable suppliers should be removed before price is seen.
CombinedTechnical and commercial responses are submitted together in one submission.Cases where you want everything in one round but still need to assess technical fit.

The advantage of the two-envelope structure is that price cannot bias the technical judgment. A supplier cannot win a technical evaluation because they were cheap, and a cheap but unsuitable bid never reaches the commercial stage. Krayuv supports all three workflows, with separate deadlines for each stage where the workflow needs them.

09

Timelines, approvals and the audit trail

How long should an RFQ stay open? There is no universal number, because the right window depends on the complexity of the requirement and the effort suppliers need to price it. A simple catalog item can be quoted quickly. A made-to-order or multi-line requirement needs more time, and a two-envelope RFQ needs time for both stages. A useful test is to ask what the supplier must do before quoting, such as checking stock, getting a sub-supplier price or preparing technical documents, and to give them enough time to do it properly. Rushed windows tend to produce padded prices or no response.

Approvals belong in the process, not around it. Decide in advance who must sign off on an award above a certain value, and make that approval part of the record. Then keep the evidence in one place: who was invited, which quotes arrived and when, how they were evaluated, what was awarded and why. Krayuv keeps RFQ unlock and award details, so the decision has a record behind it rather than scattered email threads.

10

Common RFQ process mistakes

  • Vague specifications. Suppliers fill the gaps with different assumptions, and the quotes cannot be compared.
  • Inconsistent information. Answering one supplier privately, or sending different attachments to different suppliers.
  • No stated evaluation basis. Suppliers do not know whether price, delivery or quality will decide, so they guess.
  • Quotes in different formats. Unit versus total price, taxes in or out, mixed currencies, mixed units.
  • Opening quotes early. Peeking before the deadline undermines trust and can invalidate the exercise.
  • Awarding without a note. The decision may be right, but nobody can later show why.
  • Never closing the loop. Unsuccessful suppliers hear nothing and quote less seriously next time.
11

Running the RFQ process manually versus in software

A manual RFQ works on email and a spreadsheet, and for an occasional purchase that is fine. The strain shows when RFQs become frequent: the specification is rewritten each time, suppliers reply in different formats, comparing takes longer than quoting, and the proof of fairness is a mailbox. Sealed submission is a matter of trust rather than control.

RFQ software replaces that with a structured process: a step-by-step builder for the RFQ, supplier qualification criteria, a supplier portal where quotations are submitted in a common format, sealed quotations, technical evaluation with notes, side-by-side comparison and a recorded award. Krayuv RFQ software is built around those steps, and it sits inside the wider source-to-pay flow so an award can carry on into purchasing. If you want a pre-send review list, the RFQ checklist is a good place to start, and you can request a demo to see the workflow end to end.

Frequently asked questions

What does request for quotation mean?

A request for quotation is a document a buyer sends to selected suppliers asking for price and terms on a defined requirement. Suppliers reply with a quotation, and the buyer compares the replies before awarding.

Is an RFQ legally binding?

Generally, an RFQ is an invitation to quote rather than a commitment to buy, and a purchase order is what creates the buyer's order. The exact legal position depends on your terms and jurisdiction, so have your legal team confirm how your RFQ wording is treated.

How many suppliers should receive an RFQ?

For a standard requirement, three to six qualified suppliers is a practical range. Fewer weakens competition, and more adds comparison work and can discourage serious bidders. Widen the list for high-value or highly competitive categories.

How long should an RFQ stay open?

Long enough for suppliers to price accurately. Simple, catalog-type items need little time, while made-to-order or technically detailed requirements need more. Consider what each supplier must do before quoting and set the deadline accordingly.

What is the difference between an RFQ and a quotation?

The RFQ is the buyer's request, and the quotation is the supplier's response. One document starts the exchange, and the other answers it.

What is the difference between an RFQ and a PO?

An RFQ asks for prices so you can choose a supplier. A purchase order is the buyer's formal order to the chosen supplier, issued after the decision is made.

Can an RFQ be followed by a reverse auction?

Yes. A common pattern is to use the RFQ to qualify suppliers and confirm they can meet the specification, then invite the qualified suppliers into a reverse auction for a final round of price competition.

What should an RFQ include?

A clear specification, quantity, delivery location and date, payment and commercial terms, quote validity, the evaluation basis, required documents, the submission method and a firm deadline. The how-to-write-an-RFQ guide lists each section.

Have a specific procurement problem in mind?

Book a short call and we'll talk through it directly.