Krayuv

Types of Procurement Auctions Compared

8 min read

Compare the main types of procurement auctions: English reverse and forward, Dutch, Yankee and benchmark formats, and when each one fits a buying or selling goal.

01

Auction types at a glance

Procurement auctions are structured, timed bidding events, and the main types differ in direction (buying or selling), how the price moves and whether one winner or several is allowed.

The table below summarizes the formats covered in this guide. Terminology varies slightly between organizations and platforms, so treat it as a general reference rather than a standard.

Common procurement auction formats compared
FormatWho bidsHow the price movesTypical use
English reverseSuppliersSuppliers openly lower their pricesBuying defined goods or services from several qualified suppliers
English forwardBuyersBuyers openly raise their bidsSelling surplus, scrap or used assets
DutchSuppliers (reverse) or buyers (forward)Price moves in set steps until one party acceptsFast, single-winner decisions with a clear price range
YankeeSuppliers (reverse) or buyers (forward)Bidders compete for parts of a total quantitySplitting volume across several winners
Benchmark-basedSuppliersSuppliers improve against a confidential target, seeing only their positionBuying when you want competition without revealing the target
02

Reverse auction

In a reverse auction, a buyer publishes a requirement and invited suppliers bid prices downward. The lowest qualified offer leads, and competition pushes prices toward the supplier's true best. It is the format most buyers mean when they say procurement auction, and it is called reverse because the usual auction logic is flipped: the winner offers the lowest price rather than the highest.

The format works best when the specification is fixed, suppliers are pre-qualified and several of them are capable of delivering. It is covered in depth in what is a reverse auction, the glossary entry for reverse auction, and the practical guide to reverse auction best practices.

  • Strength: transparent competition and a clear record of how the final price emerged.
  • Watch for: weak specifications, unqualified bidders and bid increments that discourage real offers.
03

Forward auction

A forward auction is the traditional direction. The organization is the seller, and buyers bid prices upward for lots such as scrap metal, surplus inventory, used equipment, by-products or end-of-life assets. The highest qualified bid wins.

For procurement and supply chain teams, forward auctions are useful for recovering value from items that would otherwise be written off or sold informally. A competitive process also gives finance teams a documented basis for the sale price.

  • Strength: a transparent route to market for items that are difficult to price.
  • Watch for: describing lot condition accurately, allowing inspection where relevant, and verifying buyers before the event.
04

Dutch auction

A Dutch auction runs the price in the opposite direction from an English auction. In a forward Dutch auction the price starts high and falls in steps until a buyer accepts it. In a reverse Dutch auction used in procurement, the price offered to suppliers starts at a level favorable to the supplier and moves in steps toward the buyer until a supplier accepts the price on the table. The first to accept wins at that price.

Because the clock forces a quick decision, Dutch auctions can finish fast and suit situations where there is a clear price range and you want a single winner without a long iterative process. The trade-off is that bidders do not see each other's prices, so there is less discovery of how low the market would go. See the glossary entry for Dutch auction.

  • Strength: speed, and a simple instruction to bidders: accept the price or wait.
  • Watch for: setting the step size and interval sensibly. Steps that are too big leave money on the table, and steps that are too small make the event drag.
05

Yankee auction

A Yankee auction is used when the buyer needs a quantity that can be split among several winners rather than a single supplier. Bidders say how much they can supply, or want to buy, and at what price, and the quantity is allocated across them in order of best offer until it is fully covered.

Typical settings include buying a large volume of a commodity from several suppliers to reduce concentration risk, or selling a large lot in portions to multiple buyers. Yankee events can run in forward or reverse direction. Common controls include a minimum bid quantity, a maximum quantity per bidder and whether partial fulfilment is acceptable. See Yankee auction in the glossary.

  • Strength: spreads volume across suppliers while still creating price competition.
  • Watch for: confusing allocation rules. Tell bidders in advance how the quantity will be shared and what minimums apply.
06

English vs Dutch: bidding directions explained

People often mix up English and Dutch auctions because they relate to direction. It helps to separate two questions. First, who is bidding: buyers or sellers. Second, how does the price move: by competitors reacting to each other, or by a clock moving in fixed steps.

English and Dutch auctions, forward and reverse
English (open, iterative)Dutch (stepped, first to accept)
Forward (buyers bid)Bids rise as buyers outbid each other; the highest bid winsPrice falls in steps from a high start; the first buyer to accept wins
Reverse (suppliers bid)Offers fall as suppliers undercut each other; the lowest offer winsPrice moves in steps toward the buyer; the first supplier to accept wins

In short, English auctions are driven by bidders reacting to each other, and Dutch auctions are driven by a price clock. English formats generally reveal more about how low or high competitors will go, while Dutch formats are quicker and simpler.

07

Benchmark-based auctions

A benchmark-based auction adds a confidential target to the competition. The buyer sets a private reference price for each item, perhaps from a recent contract, an internal estimate or an earlier quotation round. Suppliers compete to improve their offers and are shown where they stand, but not what the target is.

The concept appeals to buyers who do not want to reveal their budget but still want suppliers to compete hard. It can also be useful when starting prices come from an earlier RFQ and the buyer wants a final competitive round before award.

Krayuv offers this as the Competitive Benchmark Auction (CBA). Offers are scored live against a hidden benchmark, and suppliers see only their rank. The mechanics of any benchmark format vary by platform, so always read the rules your platform publishes before you rely on it.

08

Choosing a format

No format is best in all cases. A good starting point is to ask what you want from the event.

Match the goal to the format
If your goal is...ConsiderWhy
Lowest price on a defined requirement with several suppliersEnglish reverseOpen competition reveals suppliers' best prices
Get value from surplus or scrapEnglish forwardBuyers compete upward for the lot
A fast decision at a price you can acceptDutchThe clock forces a decision and the first acceptance wins
Splitting a large volume across suppliersYankeeQuantity is allocated across several winners
Competition without revealing your targetBenchmark-basedSuppliers see only their position
Complex scope, quality-critical or few suppliersRFQ or scored evaluationPrice competition alone would be misleading

Also consider your market. Where suppliers are used to online bidding, English reverse events are straightforward. Where they are not, a briefing session and a trial event matter more than the choice of format.

09

Preparing suppliers for each format

Suppliers behave differently depending on the format, and unfamiliarity is one of the main sources of poor results. A few preparation steps apply to every type.

  • Share the rules in writing: format, schedule, bid increments, tie handling and what suppliers will see during the event.
  • Explain the allocation logic clearly, especially for Yankee events where quantity is split.
  • Give suppliers a chance to test the bidding screen and confirm logins before the event, and check that the interface works on the devices they use.
  • Clarify specifications in the open, to all bidders at once, before the event starts.
  • Tell suppliers what happens after the event: award timing, notification and any post-event negotiation.
10

Auctions vs RFQ vs tender

Auctions are one way to run price competition, but not the only one. An RFQ collects sealed quotations once, usually with a review of technical and commercial terms, while a formal tender follows a stricter process with documented evaluation criteria. An auction is iterative: suppliers can revise their price in response to others during a live window.

Many organizations combine them. They use an RFQ or technical evaluation to qualify suppliers and confirm specifications, then run an auction among the qualified group for the final price. The comparison in reverse auction vs RFQ covers when each makes sense, and RFQ vs RFP vs RFI explains the document types that usually come before.

11

Running multiple auction formats on one platform

Few organizations need every format, but buying and selling needs do vary. A business may run reverse auctions for raw materials, a Yankee event to split volume, and a forward auction for scrap, all in the same quarter. Using one platform keeps rules, supplier records and reporting consistent.

Krayuv's reverse auction software supports English reverse and forward, Dutch and Yankee events (the last two in either direction), plus the Competitive Benchmark Auction. Buyers choose tie handling, whether suppliers see their rank and whether to use an optional automatic time extension. After an event they can review bid history and create purchase orders or contracts from the winners, and the wider source-to-pay workflow connects the result to purchasing and payment.

Frequently asked questions

What are the types of auctions in procurement?

The main types are English reverse auctions, English forward auctions, Dutch auctions, Yankee auctions and benchmark-based auctions. They differ by direction (buyers or suppliers bidding), how the price moves and whether one winner or several are allowed.

What is a forward auction?

A forward auction is one where the organization sells and buyers bid prices upward. It is commonly used for scrap, surplus inventory and used assets, and the highest qualified bid wins.

What is a Dutch auction in procurement?

In a Dutch auction the price moves in set steps on a clock rather than through bidders reacting to each other. The first party to accept the price on offer wins. It can be run in either direction and is useful for fast, single-winner decisions.

What is a Yankee auction?

A Yankee auction allocates a total quantity across several winning bidders in order of their offers, rather than awarding everything to one party. It is used to split volume among multiple suppliers or buyers.

Which auction format gives the lowest price?

There is no guaranteed answer. English reverse auctions are the most common choice for price competition because suppliers can see and respond to competing offers, but results depend more on specification quality, supplier qualification and the number of capable bidders than on format alone.

Can one platform run all auction formats?

Some can. Krayuv supports English reverse, English forward, Dutch, Yankee and Competitive Benchmark auctions on one platform, so rules, suppliers and reports stay in one place.

Are auctions suitable for services?

They can be, when the service has a clear scope and measurable service levels, such as transport on defined lanes. For services that depend on judgment or close collaboration, a scored evaluation that weighs quality and price is usually a better fit.

Have a specific procurement problem in mind?

Book a short call and we'll talk through it directly.